Come to a very hundred-use square wallet.
You can do pendants, put on, on the key, or make the key bag directly, do it.
Stereo space, it is also very simple
This package is about: 7.4cm * 7.5cm * 7.5cm
Fabric: 15cm * 29cm
Lib: 15cm * 29cm
Take the cloth: 32cm * 5.5cm
Edge cloth: 11cm * 4cm
Thick lining, a plurality of thin liners, and a 13cm zipper.
The production steps are as follows:
Step 1: Put the front side of the bridge with water-soluble double-sided adhesive bridges on the front side of the face, then put it on the top, so that the faces and lit are opposite, as shown in the figure.
The water-soluble double-sided adhesive is also to make it not displacement, and the whole is more accurate, you can also sphere, or to fix it with other methods such as beads.
In the second step, the face is turned to the front side, and the other short side of the face is folded back, and the other short side is folded back.
In the third step, the other side of the zipper is tied to the other side of steps 1 to 2, and then turn to the front side.
In the fourth step, it will take the quadruple iron and iron nip.
In the fifth step, turn the bag to the front of the face, and then put the cloth to the discharging of the drawhead.
In the sixth step, turn to the front of the Lip, as shown in the figure, and fix it with the clip, and then secure.
In the seventh step, put the packed face and the front side is placed on the front side, and then fold the upper and lower sides to fold 1 cm, and the sewing in 0.7cm from the left side.
Step 8, if the above figure will be folded backwards.
In the ninth step, then the edge of the bag is folded back, and it is folded to the side of the zipper.
In the end, after folding, it is sewn to the needle seam, in the same way, this is completed, which is completed by a square change.
Finished product, completed!