【PConline Evaluation】
At the beginning of the PC’s emergence, a box of shots was set up in the center of the table, and all kinds of office workers were around. However, the PC is both civil and military, and the boxes and one screen are growing. Therefore, the discarding box is left to leave the screen, and the box is placed under the table case. Ren screen stands on the table case. Recently, the box is from the province, and the adversity changes, and the adversity changes. Among them, there are exquisite people, wrapped in silver, and Liuli. They are willing to get favored with a delicate figure. who else? Jinhetian Mate3 also. Why dare to say this? Mo anxious, the guest officer watched:
Beautiful aluminum methane glass surface
Jinhetian Mate3 is made of aluminum refined work. It has a thick texture, the rack is integrated, seamlessly connected; there is a tempered glass to cover its content, which is elegant in the texture; Essence There are two main boards, M-ATX and Mini-ITX; CPU heat dissipation must not be higher than 13cm, and the graphics card length should not exceed 27.5cm. There are ventilation holes in many places all over the body, and the performance of gain heat dissipation; fans can also be set on both sides of the top and back. This is a valuable place. It can be a slightly regular, which can be a down -to -top air duct and efficient heat dissipation. Introduction to this, I would like to hear the detailed person, and there are pictures and texts.
The first view is simple and clear. The brushed and beautiful aluminum is the bottom, and the silver plate, square hole, and circular hole are inlaid on it. From top to bottom, call for power keys, USB interfaces, and headset interfaces. Among them, the power key surface is a concentric circular pattern, accompanied by a quiet blue light during operation; the USB interface is one of two types: 3.0 and 2.0; the headset and microphone are separated.
The sideways is now its tempered glass, smooth, clear and transparent. The dark paint concealer around the panel is set on the black paint on the black paint, so that the panel is nested with the box. There is inscription at the bottom right of the panel, which indicates that Mate 3 belongs to the Jinsheta 21+ foreseeable series.
Look at the back, the hole grooves are scattered, and regularly and orderly. The slot cover is blackened, consistent with the color tone of the box, and coordinates the beauty. The upper left is the main panel, the right is the power cord interface, and the heat dissipation hole of the 80mm fan can be added. There are four rows of PCI slots below, which is enough to add graphics cards and expansion interfaces. However, there is a little insufficient, and the two rows of rows of the top are punching, which is slightly indecent.
Lie down to observe its bottom, hollowing out the heat dissipation is beneficial. In addition to the bottom plate, four round and thick foot pads, scalded silver paint, separated the four corners, which is the root of the box to stabilize the table in the table. Putting 2.5 -inch and 3.5 -inch hard disks, non -special functions are sufficient.
At the top of the view, it is still simple. It can be seen with a dust -proof mesh on the aluminum surface. A 120mm fan is optional. This fan is the core of the heat dissipation.
There are more details, a screw is fixed on the glass panel, which can be used as a handle of the panel, pushing pulling and pressing, and cheap operation; Places are scattered to improve the heat dissipation air duct; there is a long -style ventilation hole on the side of the box, and the ventilation is also strengthened when the panel is embellished with the panel, which helps heat dissipation.
Simplified & Review
In this link, the author uses the accessories at hand to give you a simple installation effect. It is seen from the figure that although the chassis is positioned in the small chassis, the design of the front “hanging” power supply and compatible small board still has a good space performance. To this end, a power supply extension line is added to connect the back of the chassis, and the loss of a little beauty is exchanged for more reasonable and efficient space utilization. It is very smooth when installed, and the operation space is large. The details are in place, and there is no place for the hand. The texture of the aluminum alloy plate is delicate and rarely rough. Before and after the installation, the most comfortable thing is a small detail mentioned earlier: the screw fixed on the corner of the side of the side surface, becoming a strength point on the smooth steel glass, helping the author to easily disassemble the side panel, very humanity Design.
Attach the installed beauty map promoted by Jinchetian Mate3:
Summarize
This box is called Jinhetian Mate3. It is simple and stylish, its aluminum is brushed and long, its glass is bright and translucent, and its appearance texture is very. The figure is petite, but there are four PCI tanks, which can be available in small steel cannons; heat dissipation air channels are more efficient from bottom to top. With his small body and elegant face, he returned to the table of the table. In its show, it is excellent in expansion and efficient heat dissipation. There is a face without losing the connotation, and the square inch table is now beautiful -the small chassis is bound to come back.