Go to the market for home improvement materials, and can be seen everywhere are lamps used in home life. The ceiling and ceiling lamps in home improvement are two widely used lamps. You know
What brand is good?
Do you know how to buy it? Let’s take a look with the editor of Weihai Decoration Network below.
1. Op
The Opan brand is affiliated to Op Lighting Co., Ltd., which was established in 1996. Its long history has made it a very influential brand in the lighting industry. Ops have innovative lighting companies with advanced technology, and their energy -saving lights and ceiling lamps are famous.
2. Huayi
Huayi is affiliated with Huayi Lighting Lighting Co., Ltd., which was founded in 1986. It takes lighting and lighting as its main business. Huayi is a well -known lamp trademark in China, and it is also a well -known comprehensive lighting brand in the industry.
3. Dancel Lighting
Noses Lighting is affiliated with Huizhou Noses Optoelectronics Technology Co., Ltd., which was founded in 1998. It has won the honorary title of “Top Ten Brands of Lighting Lighting”. Noses are not only a listed company, but also well -known domestic business lighting companies.
4. Delixi
Delixi is Delixi Holding Group Co., Ltd., which was founded in 1984. It is a leading position in domestic home electrical, electrical lighting, and industrial electrical industries.
5. Langneng
Langneng lamps are affiliated with Honeywell Lang Energy System Technology Co., Ltd., with high product quality and won the honorary titles such as the famous trademarks in Guangdong Province. It is also one of the brands in China earlier in the field of electrical lighting.
6. Panasonic
Panasonic belongs to China Panasonic Electric Co., Ltd., and Panasonic Electric has a certain reputation worldwide. Panasonic, founded in Japan in 1918, belongs to the Fortune 500 companies, a world -renowned consumer electronics brand, and a large comprehensive electronic technology group.
7. Philips Zhaoxing
Philips Lighting is affiliated to Philips Electronics Investment Co., Ltd. The Philips brand was founded in the Netherlands in 1891. It belongs to the leaders of global home lighting and leading high -power LED manufacturers.
8. TCL lighting
TCL Lighting is a well -known enterprise belonging to TCL Lighting Electric Co., Ltd., which belongs to building electrical design trust products and energy -saving lighting.
9. Odo
The Ao Duo brand is one of the well -known brands and online sales brands of well -known brands and online sales.
10. Foshan Lighting
Foshan Lighting is affiliated with Foshan Electric Lighting Co., Ltd., founded in 1958 and is a listed company. The quality of its products is guaranteed and after -sales service is in place.
How to install the top light?
Step 1: Select location
First, choose a good installation location, such as the ceiling lamp in the living room, dining room, and kitchen. In the bedroom, considering the effects of mosquito nets and light on sleep, the ceiling light should not be installed above the bed. In addition, the ceiling light needs to be selected for the wall or ceiling that can accept the weight of the ceiling lamp for the device. Try not to choose the wooden wall surface to avoid the risk of falling for a long time.
Step 2: Disassemble the mask
The installation of the ceiling light should be split first. In general, the ceiling lamp mask has two fixed methods: rotation and buckle stuck. Pay attention when disassembling After getting down, take off the lamp to prevent crushing the lamp tube during the device.
Step 3: Put the base
If the device is not good, it will be miserable when it falls. The base is placed in the predetermined device position. Use a pencil to make a symbol on the wall. The expansion bolt, pay attention to the diameter of the drilling and the depth of the buried bolt. Then put the base back to the predetermined position and fix it.
Step 4: Connect the wires
After the device is installed, it is to stop the line and the power. Pay attention to the safety of this step, and the device must be careful. It is best to close the total power supply first when the device. The electrical touch should be outstanding, and it must be wrapped in vinyl cloth, and insisted on a certain interval. If possible, try not to put the two -line head under the same metal piece to avoid short circuit and risk.
Step 5: Put a mask, suspension
After connecting the wires, you can try to power on. If everything is normal, we can complete this step in the closed power supply. If it is a living room ceiling light, you need to install a series of suspension. Because each ceiling lamp crane is different, the ceiling decoration is different. For details, please refer to the manual. The suspension is generally left, and the device can be stored after the device, and it can be replaced when necessary in the future.
Precautions for installation of ceiling lights
(1) When installing the ceiling lamp in the masonry structure, a embedded bolt should be used, or the expansion bolts, nylon plugs or plastic plugs should be used; wood wedges should not be used. And the bearing capacity of the above fixed parts should be matched with the weight of the ceiling light. To ensure that the ceiling light is fixed and reliable, it can extend its service life.
(2) When the expansion bolts are fixed, the bolt specifications should be selected according to the technical requirements of the product. The diameter and burial depth of the drilling hole should be consistent with the bolt specifications.
(3) The number of fixed lamp bolts should not be less than the number of fixed holes on the base of the lamp, and the diameter of the bolt should be matched with the aperture; the lamps with no fixed installation holes on the base (punching it by yourself during installation), each lamp is used for the use The fixed bolt or screw should not be less than 2, and the center of gravity of the lamp should be consistent with the center of gravity of the bolt or screw; only when the diameter of the insulation platform is 75mm and below, 1 bolt or screw can be used.
(4) The ceiling lamp should not be installed directly on the combustible objects. Some families use the three grasses after the paint to lined the ceiling lamp for the beauty. In fact, this is very dangerous, and the heat insulation measures must be taken. When combustible, heat insulation or heat dissipation measures should also be taken.
(5) Before the ceiling light is installed, it should be checked:
① The cross section of the wire core of each lamp, the copper core soft wire is not less than 0.4mm2, and the copper core is not less than
0.5mm2, otherwise the lead must be replaced.
② The connection between the wire and the light head, and the connection between the parallel lines between the lamp head should be firm, and the electrical contact should be good, so as to avoid sparks between the wires and the wiring end due to poor contact, and the danger occurs.
(6) If the snail light head is used in the ceiling light, the wiring should also pay attention to the following two points:
(7) ① The phase line should be connected to the terminal of the central contact, and the neutral line should be connected to the terminal of the thread;
(8) ② The insulation shell of the lamp head should not be damaged and leaked to prevent electric shock when replacing the bulb.
(7) The ceiling lamps equipped with incandescent light bulbs should not be attached to the lampshade; the power of the bulbs should also be selected according to product technical requirements. Essence
(8) The two line heads connected to the power supply of the ceiling light, the electrical contact should be good, and the vinyl cloth should be wrapped in a certain distance. , To avoid short circuit and danger.
(9) Educate children not to throw balloons and other objects in the interior, so as not to hang the decorative effects of the decorative objects hanging on the lamp or affect the decorative effect of the lamp.
What is the price of ceiling lights
1. Ultra -thin LED ceiling lamp Round Nordic Office Lantern Lantern Lantern Lighting Simple and Modern House Balcony Room Master bedroom Lights. The reference price is generally around 40 yuan.
2. LED lights suction ceiling lamp Lantern lamp Langle Langle Lights Simple Simple Modern bedroom Lantern atmospheric round house lobby lamps, the reference price is generally around 240 yuan.
3. Philips dimmed LED round ceiling lamp Simple and atmospheric living room bedroom lamps are ultra -thin official. The reference price is generally about 270 yuan.
4. The living room light is simple and modern atmospheric family personality bedroom lamp 2019 new package combination LED ceiling lamps. The reference price is generally around 1770 yuan.
5. Nordic lamps living room Simple and modern 2019 new atmospheric bedroom lamp all -house set headlights sucking top lights. The reference price is generally around 900 yuan.
6. Living room lights Simple and modern atmospheric lamps Modern simplicity 2019 new LED ceiling lamp bedroom lamp high -end. The reference price is generally around 1,100 yuan.
7. Living room lamp 2019 The new master bedroom lamp modern minimalist restaurant household atmosphere LED ceiling lamp set meal. The reference price is generally about 890 yuan.
8. The living room lamp 2019 new lamps are simple and modern atmospheric home LED bedroom ceiling lanterns. The reference price is generally about 860 yuan.
9. New Chinese -style ceiling LED LED Simple Chinese Wind bedroom Restaurant rectangular Salad Billy solid wood antique living room lamp. The reference price is generally around 930 yuan.
How to buy top lights?
1. First determine the number of purchases. A house needs to be used to suck the lights. Consumers must count the number of purchases before buying ceiling lamps. Like the bedroom, you can choose the same series of products; the living room and dining room can choose the mother and child series products; the kitchen and bathroom can choose products with the same size as integrated ceiling.
2. Choose the shape, the ceiling light has two shapes: circular and square shape. Generally, the bedrooms and study rooms are more suitable for choosing round ceiling lamps; the living room, dining room, etc. choose square ceiling lights to be more space; kitchen and bathrooms are generally a square shape similar to integrated ceiling, do not use wrong.
3. Choose the mask material, the mask of the ceiling light is what we can really touch. There are many manufacturers who produce top lamps in the market, and the mask materials used each other are different. Common acrylic masks, plastic masks and glass masks. It should be an imported acrylic mask after two stretching. The quality of the mask can be pressed by the hand to see how soft the softness is, and it is soft; then put the palm of the palm, look at the color, rosy; finally open the cover to see if it is convenient to disassemble.
4. Select the light source. The ceiling light can be divided into ordinary incandescent lamps, fluorescent lamps, halogen lamps, LED lights, etc. according to the different light sources. Different light sources have different places for suction lights. For home use, the LED light should be given priority. The price of the ceiling light of LED light sources is not very expensive, but it is very power -saving, the service life is long, and the brightness is strong, and the cost performance is super high.
The above is what Weihai Decoration Network shared with you about
as well as
Related content, pay attention to Weihai Decoration Network to understand more decoration knowledge.
What brand is good?
What brand is good?
How to install the top light?