I have always liked light pollution. My chassis used to be full white light. Later, with the popularity of RGB, the lights of the computer could be ever -changing, and I planned to gradually upgrade my computer. Water cooling and memory have been upgraded some time ago.
The original wind and cooling were replaced by Qiao Sibo’s light shadow 240 fantasy water cooling, which started the first step for me to create light pollution.
The second step was that the original Z170 motherboard was suddenly broken. Thinking that water cooling can support AURA’s Aura Shenguang synchronization, I simply started the second-hand ASUS Z270 -R motherboard. However, when the motherboard arrived at home, it was found that the 5V 3PIN interface supported by Qiao Sibo Guangying 240 Phantom Water Cooling, and the ASUS Z270-AR motherboard was the 12V 4PIN interface. These two were not worthy of it. No way, fortunately, Qiao Sibo Guangying 240 Phantom Water Cool comes with the controller and remote control. You can control it by yourself. You will use it first. When you upgrade the computer configuration to change the motherboard, you must change to a motherboard that supports 5V 3PIN Essence
The third step is to replace the memory that would not be glowed with a fantasy halberd, so that the memory can also start to glow, and the memory can be connected in sync with Aura Shenguang of Aura in the later stages of memory.
This time, Double 11 is coming. Thinking about the Double 11, you have to update the computer, because there are fewer RMB in your pocket, and the house will be decorated next year. The white light fan, replace it with RGB.
Because the water cooling is changed by Qiao Sibo, in order to facilitate control, the fan has long placed the Qiao Sibo FR-701 Phantom version on the collection clip. It also specifically confirmed that the fan is also a 5V 3Pin interface, which can be consistent with the interface of water cooling in the later stage. Take advantage of the Double 11 home this year.
Let’s take a look at the effect inside the chassis first. The light sources in the chassis come from water cooling, memory, rear fan, graphics card logo, and lower part of the chassis. The rear fan, graphics card and chassis that do not support the RGB effect is not supported. These are all upgraded one by one in the later stages.
The effect of water cooling and memory that has been replaced with RGB is much cool than the separate white light.
This is the white light fan who wants to start this time. This fan has only a circle of white light bands.
Next, the unpacking of Qiao Sibo FR-701 Phantom Edition, the fan packaging really didn’t say anything, and the unpacking process was not as cumbersome as other large products.
Qiao Sibo FR-701 Phantom Edition is no longer as square as other fans. Its aperture is made of PC, and its abrasion resistance is better than Acrylic. The aperture is polished, and the light emitted through is clear. It is very beautiful to watch others’ sunnic orders.
The Qiao Sibo FR-701 Phantom Edition uses a 4-pin PWM intelligent temperature control interface, which can calmly face the performance and quietness. When the temperature of the case is low, the fan speed is low to ensure mute. As the temperature rises, the speed will also increase, ensuring a good heat dissipation effect.
The male 5V 3Pin interface can be connected in series with the nearby 5V 3PIN device so that the limited motherboard interface can control more devices. Now my motherboard cannot support 5V 3Pin for the time being. Fortunately, water cooling brings a controller, let’s get water -cooled controller first.
But. Essence Essence Essence Essence When I was going to insert the plug on the controller, I found that the interface of the controller was like this? The interface of the controller is actually 6 stitches. What about 3 stitches? After finishing the car again. Later, I checked it before I knew that the controller was the interface of 6 stitches, and the water -cooled fan was also dedicated to 6 stitches. I wonder if I did n’t look at the controller’s interface before buying. There is no way to install the fan on the scalp. Thinking that even if the 5V 3PIN plug is controlled by the lighting effect, even if it is not inserted, the big deal is to control the effect, as long as it can be on.
However, it is contrary to his wishes. The interface of 5V 3PIN is not connected, and the lights of the fan cannot be on. Think about the cool effect in the sun, and look at the ordinary fan that I won’t glow. At this time, it is really tears.
There is no way to use it like this, because this fan can support PWM intelligent speed adjustment, so you do n’t replace the fan back to the original. At least this fan can make the chassis mute effect better, and it will not be on.
At this time, I went back and looked at the details of the product. When I saw that the motherboard did not have a 5V 3Pin interface, I had to buy another controller to control the light effect. Why didn’t I look closely here before buying? I thought that there was no controller but could not control the lighting effect, but I didn’t expect that it was not even bright. Alas, let’s make money to change the motherboard and CPU.
This time the upgrade of light pollution has been turned over again. It seems that the creation of light pollution is not so simple. Whether it is upgraded or newly created light pollution, you must understand all kinds of excuses. Be sure to learn from my blood and tears.
Let’s sell the recent learning knowledge.
RGB fans are divided into 5V 3pin and 12V 4pin!
5V 3PIN RGB can achieve multi -color colorful effects and can be controlled to a single lamp bead.
12V 4PIN RGB can only show the RGB effect of monochrome transformation!
And different motherboards will have different interfaces. Even if AURA supports Aura Shenguang synchronized motherboard, there will be 5V 3PIN, and some are 12V 4Pin interfaces. Therefore Can’t match with the fan.