How to choose the fin tube radiator really need serious consideration. Some problems that focus on thermal efficiency, others can achieve significant results in the short term; there are some attention to corrosion, mainly because environmental factors, and the appearance. Therefore, all kinds of things, what is the most basic, can not ignore?
1. Working pressure of fin tube tube, to meet system working pressure, consistent with relevant product standards in the current state; ; 3. It is an industrial building with corrosive gases or in the use environment where the relative humidity is large, and the corrosion-resistant fin tube heat exchanger is selected; When using a steel fin toner, it should be a closed system and can meet the water quality requirements of the product. 5. When using an aluminum fin sink, the liner-proof-proof aluminum fin heat sink should be used to meet the product water quality requirements; 6. Select a regular radiator manufacturer, have a good after-sales guidance installation, technical support, main Production of all kinds of heat sinks, heat exchanters, coolers, seller, heater, fin tubes, etc.
Compared to the light pipe, the fin tube has a large use area, from straight to the first reinforcing heat conduction, but in actually the heat transfer area is expanded, the heat transfer coefficient is improved, while the heat transfer area is increased is heat transfer. Provide the same conditions. The heat exchanger fin tube feedstock should be selected according to the main use and standard of the heat exchanger. At present, the commonly used raw materials are aluminum, aluminum alloy profiles, copper, brass, nickel, titanium, steel, zinc, nickel, etc. , Steel, nickel alloy, etc., which is more used in aluminum and aluminum alloys.