Titanium compulsory cycle evaporator
What is the evaporator of titanium compulsory circulators? What are the characteristics of titanium compulsory cycle evaporator? How to deal with wastewater for titanium compulsory circulators?
The editor of Kang Jinghui talked with everyone what is the titanium compulsory recycling evaporator, what are the characteristics of titanium compulsory recycling evaporator, which wastewater treatment, and what are the scope of application?
1. Titanium compulsory recycling evaporator process
Titanium compulsory circulating evaporator refers to the use of compulsory circulating processes for wastewater or solution evaporation crystals, and forced circulating evaporators can be used to avoid boiling products on the heating surface. Must be fast.
When the circulating liquid flows through the heat exchanger, it is heated, and then some material liquid evaporates when the pressure is reduced in the separator, so as to cool the liquid to the boiling point temperature at the boiling point that should be under pressure. Due to the reasons of the circulating pump, the operation of the evaporator is basically not related to the temperature difference, the recycling speed of the material can be accurately adjusted, and the evaporation speed rate is set within a certain range. In the crystallization application The separator design is separated from the circular crystal mud.
Second, titanium compulsory recycling evaporator characteristics
The material of the titanium compulsory circulating evaporator is mainly titanium, especially the titanium material in the place where the material is in contact with the material.
1. The cycle of the solution in the device mainly depends on the mandatory flow generated by the power plus power. The circulation speed can generally reach 1.0-3.5 meters per second, and the heat transfer efficiency and production capacity are large.
2. The raw material liquid is pumped from the bottom to the top, and flows upward along the tube of the heating room.
3. The material does not evaporate in the heat exchanger, sparkle in the separator, the vapor is discharged from the upper part in the separator, the fluid is blocked, the bottom of the cone is inhaled, and then enter the heating pipe and continue the cycle.
Advantages: large heat transfer coefficients, anti -salt analysis, anti -dirt, strong adaptability, and easy cleaning.
Disadvantages: The consumption energy is large, the solution stays for a long time; the cost and maintenance costs are slightly higher.
Third, titanium compulsory circulating evaporator applicable range
The compulsory recycling evaporator is suitable for chemical, food, pharmaceutical, environmental protection engineering, waste liquid evaporation and other industries such as solution Essence
In order to answer your doubts, the above is what we have organized about China Forced Circulating Evaporator Evaporating Machine for Pharmaceutical, hope it can help you.