I can’t help it, I sew a pair of pants in my hand
When I had a small white, I first involved in clothing -related books when I was free. I don’t want to understand it. Finally, I can see me ‘itchy hands’, I can’t help but use the simplest way to make the clothes — a recovery -the old clothes that fit myself are cut into new fabrics and suture.
I have a pair of wide -leg pants, the fabric (LA) people, but it is fit. I found comfortable fabrics and prepared to replace it to make one.
The webmap is like this
The process is as follows
Step 1: Observation
Observe the waist, legs, and crotch seams in the pants. Surprisingly, determine that you use the simplest and simpler hand sewing needle: flat needle, half -return needle, and hiding needle method!
(The approximate amount of pants is long, almost one meter, the legs width of a single pants are almost one meter)
Platform with a flat needle and a half -back needle
Pants seam with a half -back needle and hiding needle
Second cloth: disassembling (using a tool removal-very cheap, better than scissors) waist and pants seams
1. Remove the waist
Find the interface, disassemble from the interface, pick the line
There were several times in the middle, and then picked -pull.
Disassembling knife comes in handy!
Observe when disassembling the outermost, you can use the needle gap between the needle
Use half a needle seam inside
Due to the symmetrical left and right of the wide -leg pants, just remove a pair of pants legs
Mark the front and back of the trouser legs
Step 3: Prepare fabrics, scissors ✂️, heavy objects (three are indispensable)
Old up, new, old fabrics cover new ones, alignment -pressing good objects -cutting
The one -meter fabric I bought was neat and neat, and the pants were lacking. Do not cut it first, see what solutions are solved
The position can be adjusted with heavy objects
After cutting (using white chalk) “right front film”, it is convenient for the two pants legs to suture
Cutting another pair of trousers: old clothing films reverse on the new fabric
[Note: The new fabric will always be on the front, the habit]
Step 4: Prepare suture, prepare needle lines and back -shaped needles.
First sew the legs of the trousers first, and finally go to the waist
Semi -back stitching:
Tibetan needle seam:
① Symmetry from the waist section to the left and right, mark the four symmetrical points;
② The legs of the trousers are the same;
③ First point -to -point fixed sewing. (Fixed -shaped needle fixation)
Reserve one centimeter wrap edge of the rubber band, which is beautiful
Four -class split stretch suture
Wow, finally there is a prototype of pants!
Just a fixed line under the waist of the pants, use the most simplest flat needles, and automatically collect the folds!
Haha, it is also flattened, but there is no need to divide the four -equal. Please ignore my terrible stitching pins [Don’t look]
Dang Dang Dang Dang, ok!
There is also the end of the end that has fallen due to unexpectedly. Let’s cut it, and then sew the side sewing (this belongs to the rework).
This also gave me two inspiration:
① The balance of the fabric is not necessarily neatly neat
② If you want to wrap your feet and sew it into a cylinder in the pants legs in advance, otherwise it will be ⭕️, how can you fold the triangular needle in it? Therefore, accumulate experience, do not make such a mistake next time.
Hee hee, you can wear your pants, Oye! [Power] [Sahua] [Tiger]
Product Recommendation: darts and waistband pleats automat pants