Hello aquarists! If you have any ornamental fish feeding problems, you can directly search the whole network for fish farming methods and keywords, so that we can easily raise water and happy fish.
Hello old way, please ask the rubber strip in the fish tank to cover
A layer of white like moldy things
What to do, just wash it off? Will it burst the cylinder after a long time? Trouble to teach, thank you!
The problem is not difficult, there are two important points, one is the moldy substance in the fish tank, and the other is what factors are related to the bursting tank?
Not only the rubber strips are moldy in the fish tank, but there are mold spots in many places
In the past, the older generation had crates in their homes, some could put rice and noodles, and some could
Pack old clothes
, most of them will put something called rotten eggs, the scientific name may be mothball, the main role is
Anti-mildew, insect-proof, moisture-proof.
If there is a rainy season, in some cases,
Old clothes will grow hair or mold, and the reason in the fish tank is the same as this.
After all, the fish tank is a high temperature and humid environment, so isn’t it normal for mold spots to grow on the glass glue?
See
Just wipe it off or wash it
, if it can’t be washed off, that’s it, don’t bother at all, proving that the thing may be inside the glass glue.
Not only can we see mold spots on the glass glue, but this glass glue may not be the bottom of the fish tank.
The glue seams on the sides can be seen,
At the same time, the fish tank cover, the corner of the glass in the fish tank, the bottom of the fish tank light, etc., many places we can’t notice, you can see the presence of mold spots.
So, in the middle of summer, during the rainy season, when it is relatively wet,
It must be beneficial to open the fish tank cover for moderate ventilation.
It also includes the bottom filter, as long as you see a moldy spot or a place with long hair, wipe it off, and
Cleaning up the garbage on the filter cotton is actually a truth, and it has nothing to do with whether the cylinder is burst or not.
The reasons for the bursting cylinder are uneven bottom, damaged glass, thickness, width, height, material
The main problem with the reason why the fish tank bursts is that the tank will burst
It is important that the bottom is uneven
, Of course, we must also take into account the level of this unevenness, how much is the difference, and what is the thickness of the glass?
And then again
Try not to hit the bottom hard, you can pad some relatively soft things,
There is also a fish tank width and height, especially
Narrow and tall fish tanks should pay more attention.
I also talked about this in my video, as for the scratches of the glass, for thicker glass,
scratches,
Note yes
slight scratches,
The problem is not big, but the crack of the collision, that is another matter, we have to look closely and distinguish the difference between the two.
As long as you see a little scratch on the glass, you hurriedly ask if you can burst the cylinder?
In fact, it is not necessary, of course, we do not exclude,
More severe cracks may be seen as scratches
, this needs to be carefully identified by yourself.
Sometimes, I also see some scratches in the fish tank and I am afraid, and I need to observe carefully and carefully.
It is very likely that it is just a hair strand or filament of filter cotton stuck to the glass, causing us to misunderstand.
If there are really traces similar to collisions, most fish tanks will have a small amount of leakage, which is different.
And the other thing is,
Since the bottom sticker is not properly attached, transparent spots will appear in the fish tank
, this is not a problem with glass either, there is no need to fuss.
All in all, the quality of the current fish tank and the quality of the glass are very good, and the chance of an inexplicable burst tank is not large.
I am a veteran of fish farming, more ornamental fish problems please pay attention, thank you!