Since the iPhone12 was changed last year, I gradually used to get used to the convenient and practical MAGSAFE magnetic charging. I returned home and put it on the charger. Is it also convenient to install a MAGSAFE car charging on the car? Some time ago, I received the Magsafe mobile phone case and car charging provided by ESR billion -color manufacturers. After a period of time, I will share with you the experience.
First of all, it is equipped with 100 million Magsafe mobile phone cases. This official price of Apple is 399 yuan, and 100 million are only 159 yuan. Compared with Apple’s price, it still has great advantages.
I was going to buy the official Magsafe mobile phone case of Apple before. Unfortunately, the official case did not provide lens protection. The lens area was all empty. It was easy to scrape the lens in the pants pocket. The shell. These 30-50 yuan magnetic mobile phone cases are cheaper and the feel is very poor. Basically, it cannot be used in about two months. The shell of the 100 billion House is indeed a little more expensive than the ordinary shell, but it is worth it.
First of all, the MAGSAFE mobile phone case has an official Apple MFM certification. As shown in the figure, the Made For Magsafe logo is on the packaging:
Unlike other shells, the Magsafe charging logo is on the inside of the mobile phone case. It is said that the 38 magnetic core of the same factory uses the same factory:
The mobile phone case is made of real liquid silicone. The feel is indeed much better than the cheaper shell bought before. It feels very skin -friendly. All -inclusive lens design can effectively protect the lens, and the opening is very accurate. The disadvantage is that silicone is easy to stick to dust, but we can clean it with water:
Next, let’s look at the protagonist of this article-100 million Magsafe magnetic wireless vehicle charging stand. This bracket is [the world’s first] vehicle magnetic suction wireless charge. How to find out: the car charging uses a rounded corner design, and the middle is a circular corresponding MAGSAFE charging sign. The size of the charger is 8 cm x8 cm, which is not very large and will not take up many spaces:
On the back is a bracket lock hole, which is printed on it with the words founded in 2009:
The overall car charging is made of plastic. It has good workmanship and has no hair edges.
At the bottom is the USB-C power supply input port. The packaging is attached to a USB-A to USB-C line with the product.
There is a LED light on each side of the car, which will be turned on after power -on. The lights are softer and not dazzling:
The car charging base is a clip type, just clamped on the air conditioner out of the air outlet. The clip is very tight. It can ensure that the entire charger will not be turned down when it goes through a bumpy road:
The installation process is quite simple, that is, clip the clip on the outlet, put it on the car charging, tighten the nut with your hand, insert the charging cable, and get it ~ Usually not to put the mobile phone on it, it is also very high:
If you have an iPhone12, you will not think about using other chargers if you experience the Magsafe car charging: just put your phone up with one hand up.
With the ESR wireless vehicle charging the ESRMAGSAFE mobile phone case, of course, the effect will be better if the shell is not used. During the trial process of these days, I walked through many mountain roads and township roads, and there was no case where the mobile phone dropped. The suction was very strong, and the base was also stable:
If you charge your mobile phone with a normal charger, you also need to install an additional bracket. This MAGSAFE car charging is a two -in -one stand and a charger. It is much convenient to use. Just, you don’t need to adjust the rotating bracket:
When you get in the car, put your phone on the bracket. You can charge it while charging.
As for the charging speed, this is indeed a short board, because of the restrictions of Apple, only the official Magsafe charger can reach 15W wireless charging power. The third party currently only supports 7.5W. With a little improvement. I specially tested it, and the test was started from 20:43.
It took a total of 99 minutes to measure at 22:22. The 99 -minute use of a wireless car charging a total of 52%of the electricity for iPhone12, which means that it takes almost 3 hours to fully charge. Compared with Android’s wireless charging, Apple is indeed true Slowly, but when driving is outside, you can also ensure that you do n’t have to find a charging treasure when you go to your destination.
The feeling that I used to give me these days is that the 100 billion wireless vehicle charging rack is very stable. It can realize one -handed mobile phone, support horizontal and vertical, and there is no problem in appearance and quality. There is no way for Apple’s restrictions. Even if the charging speed is slower, I will always use the wireless car charging to charge the iPhone12, because it is really convenient.
Note: The mobile phone case and car charging evaluated in the article are sent by ESR manufacturers. After the experience, I will share with you ~