“Folding bed production” how to make the folding bed on the wall of folding bed
For many small -scale families, the room space is very small, and there is no place to put Xi Mengsi in a few places. At this time, it is better to choose a folding bed, which not only saves space, but also provides you with a comfortable sleeping environment. So, how does the folding bed make your own? What is the method of making a folding bed on the wall?
[Production of folding bed] How to make the folding bed on the wall of the folding bed
For those who go to school or work in the metropolis, the most distressed is the small living space. Especially in the first -tier cities, not only the rents are expensive, but the room space rented is very narrow, and there is no place to put Xi Mengsi in a row. Therefore, today I share the production of this folding bed. When you need it, you can just turn down the bed plate. It is quite convenient to lift and stand on the wall when not in use.
How to make a folding bed on the wall
1. Main materials
Fang wooden material, wooden board, hand saw, hammer, wood screw, coarse sandpaper, pencil, etc.
2. Production steps
Today the tutorial is the production of folding single beds. The size is based on the actual situation of your own. The conventional size is 80*180, 80*190 and 90*200cm. Generally, you can customize your appropriate size. Essence Here we designed 80*180cm, with a bed height of 30cm. So how to make a folding bed? It is not difficult for a carpentry enthusiast or a carpentry. Let’s take a closer look at the production method together.
1. Nail bed rack
First cut the two square woods with two and two 180cm of the two roots, and use a wooden screw (or iron nail) to nail a 80*180cm folding bed frame. Then the 2.5cm position on the inner side of the frame is added with a 75cm horizontal crotch (pictured), and a 165cm vertical gear is added in the middle. Finally, a few bedboards are nailed, so the simple frame of the bed is done first.
2. Make bed
The height of the bed is about 28cm, which can be adjusted according to your own needs. Four beds, which are divided into two inner beds and two outer beds. First of all, we make the inner bed foot, first saw the two square wood materials of 2.5*7cm in length of 26.5cm, and then insert one end into the middle of the two horizontal crotch under the bedside. swing. Then nail a 1.5cm wooden board on the lower end of the bed to play a role in a natural fixed inner bed. Then start making the outer bed. It is also a square wood material of 2.5*7cm in length of 28cm in length, insert one end into the crotch gap of the bedside head, and then fix it with screws. Finally, add a piece of wooden blocks on the outside of the outer bed (pictured). When used, hold the wooden block freely and start the folding bed.
3. Debugging the bed
After the frame of the folding bed is made, you can start adjusting the details, put the folding bed in the specified position, first adjust whether the four beds can be opened up and down, and whether the size of the placement position is appropriate. Let all activity components open freely, so that even children can put away or put down the folding bed, don’t worry about holding hands.
4. Putting the bedboard
The bedboard is paved with 1.5cm thick wooden boards. First, the remaining gap is paved with wooden boards. You can use wood screws or small iron nails to fix the crotch of the bed. The paved bed board should be flat and tight. After paving the bedboard, it should be polished with coarse sandpaper. Of course, it is best to use a polished machine, so that the efficiency will be improved a lot.
Of course, today’s DIY folding bed is also suitable for many small units. It can be made more exquisitely in the production and selection of materials. In fact, as long as you are willing to move your brain, you can improve the spatial utilization rate.
Quality furniture recommendation: Folding Bed.