Constant temperature and humidity test chamber
If it fails due to improper operation or lack of maintenance, it will not only affect the progress of the work, but also cost more than maintenance, which shows that the daily maintenance of the equipment is crucial. So what exactly should be done with maintenance? Do you usually take good care of the equipment?
The maintenance of the constant temperature and humidity test chamber is very basic to check whether the screws, parts, connecting wires and plates are loose, rusty, missing, unfirm, dented, cracked, etc., check whether the gasket, plug, sealing strip, etc. have aging conditions, and deal with them in time.
The compressor is particularly useful and expensive for this instrument, so it is also important to maintain the compressor daily. The work of the compressor requires a stable voltage, otherwise it is easy to cause damage, so a voltage regulator should be installed on the test chamber; The compressor should also not be switched on and off frequently, and the interval between each switch should be more than fifteen minutes.
If the motor and turntable reducer of the equipment do not run smoothly or have noise, the debris should be removed and lubricated with oil.
Regularly check whether the pumps, pipelines and drainage tanks in the circulation system have water leakage or stain deposits, and repair and clean them.
If the constant temperature and humidity test chamber is not used for a long time, the power should be cut off, and after cleaning and drying the chamber, it should be placed in a dry, ventilated and no direct sunlight place. Do not cover the equipment with plastic to prevent ash falling, which is easy to cause component rust. Even if it is not in use, it is powered on once a month, each time for about an hour, which can protect the compressor.
In order to prevent rust of parts, they can be wiped with oil regularly; Water should be added to the equipment in time, tap water with more impurities can not be used, pure water, distilled water, etc. should be used.
Regular use of correct maintenance methods can protect and prolong the life of the constant temperature and humidity test chamber. The staff should keep these methods in mind, accumulate experience in continuous maintenance, and make the machine perform better.
Learn more
Constant temperature and humidity test chamber_High and low temperature test chamber_Salt spray test chamber – Linpin Instrument official website