I’ve never seen a drain rack on top of a sink, but I’ve never seen a grid at the bottom of the sink!
You see, this is the double slot of the girlfriend’s house, except for this layer of grid at the bottom, his is no different, doesn’t this seem redundant?
With such curiosity, I specifically asked her, after all, in my opinion, using this grid is not as practical as using a filter at the sink outlet. Originally, the sink only needed to be flushed, and now I have to clean the grid, but in fact, it is the opposite of what I thought.
Looking closely, the gap of this layer of grid is not very small, which can well block some large objects, such as: vegetable leaves, vegetable roots, etc., which also saves you the effort of cleaning, just need to pick up this layer of grid and pour it down. What’s more, it can be specially vacated for the drain of the sink, and it will not affect your daily use.
Especially in the cleaning process, dishes and dishes can be avoided as much as possible, and they can be directly in contact with the bottom of the sink to cause bumps, which has a certain protective effect. Even if you wash it, just put the bowl on the other side or leave another sink empty, which can be used as an alternative to the drain rack.
There is no doubt that this layer of grid is overhead, the height is about 1cm from the bottom, and some edges and bracket parts will also have black rubber rings for anti-slip. It is not a problem to take it out and put it on the countertop, or to change the direction frame and use it on the sink
According to the different positions of the outlet at the bottom of the sink, some businesses will also adjust and leave different positions, so that after washing the bowls, fruits and vegetables, etc., you don’t have to rush to collect them, just put them directly in the pool, it’s a big deal to drain and put them up again.
Of course, if you don’t like the bottom is full, you can learn from him, the water outlet is partially concave, and a small area of lattice drainage is added, which is basically customized.
Even if you can’t use it, don’t delay you to borrow this trick – the edge of the sink is partially concave, and you can put drainage racks, cover plates, etc., combined with the bottom use, the more you use the sink, the smoother it is!